钻具特点：
1、大进土口开壳设计，便于弃土，提高钻孔效率
2、壳体、导板等超强度结构，提高铲斗使用寿命
3、在铲斗表面设置耐磨条，以提高耐磨性
4、方钻杆箱：130mm、150mm、200mm（可选）
钻斗描述：
1、钻斗主要用于钻遇含水砂土、淤泥、粘土、淤泥质次粘土、砂砾石、卵石、风化软弱地层。
2、根据铲斗直径、钻机类型和土质条件，可将铲斗设计为圆柱形和锥形。
3、可根据地层条件设计斗齿的焊接角度，使钻斗在任何地层条件下都能保持高效的截土量。
4、底盖采用高强度锰板，刃口分单层和双层。
5、进泥口也分为单底式和双底式。
Features:
1.Large inlet of soil open shell design, easy to dump spoil to increase the drilling efficiency
2.Super strength structure for shell, guide plate etc., increasing the service life of bucket
3.Wearing strips arranged on the surface of bucket for higher wear protection
4.Kelly box: 130mm,150mm,200mm(optional)
Descriptions:
1.Drilling buckets are mainly used for drilling water-bearing sandy soil, sludge, clay, muddy sub clay, sandy gravel, cobble, and weathered soft formation.
2.The bucket can be designed into cylindrical type and conical type according to bucket diameter, type of drilling rig and soil conditions.
3.The welding angle of bucket teeth can be designed according to formation conditions so that the drilling buckets can keep high efficiency of soil cutting amount in any formation conditions.
4.The bottom cover is made of high-strength Mn plate, and the cutting edge includes single-layer type and double-layer type.
5.The soil inlet also includes single-bottom type and double-bottom type.
技术参数：
| 分体式钻斗 | |||||||||||||||||||||||||||||||||||
| 型号 | 切削直径 | 筒体高度 | 筒体外径 | 筒体壁厚 | 加强圈厚度 | 加强圈go | 齿数(soil) | 齿数(rock) | 重量(kgs) | ||||||||||||||||||||||||||
| FTZT-60 | Φ600mm | 1200mm | 520mm | 16mm | 30mm | / | / | 5 | 1350kg | ||||||||||||||||||||||||||
| FTZT-70 | Φ700mm | 1200mm | 620mm | 16mm | 30mm | 40mm | 300mm | 5 | 1750kg | ||||||||||||||||||||||||||
| FTZT-80 | Φ800mm | 1200mm | 680mm | 16mm | 30mm | 40mm | 250mm | 6 | 1950kg | ||||||||||||||||||||||||||
| FTZT-90 | Φ900mm | 1200mm | 780mm | 16mm | 30mm | 40mm | 250mm | 6 | 2350kg | ||||||||||||||||||||||||||
| FTZT-100 | Φ1000mm | 1200mm | 860mm | 16mm | 30mm | 40mm | 250mm | 8 | 2690kg | ||||||||||||||||||||||||||
| FTZT-120 | Φ1200mm | 1200mm | 1060mm | 16mm | 30mm | 40mm | 250mm | 10 | 2950kg | ||||||||||||||||||||||||||
| 备注：所有度量单位为毫米（mm）；重量单位为千克（kg）。 | |||||||||||||||||||||||||||||||||||
| 可定制项目: | |||||||||||||||||||||||||||||||||||
| 切削直径定制：根据客户需求设计切削直径，如 φ950、φ1050 等，配合套管施工使用居多 ; | |||||||||||||||||||||||||||||||||||
| 齿型定制：根据客户需求安装不同的齿型，可以安装截齿、FZ80、FZ72、V20、22S 等齿型； | |||||||||||||||||||||||||||||||||||
| 方头尺寸定制：根据客户钻杆方头定制钻具方头尺寸，通常为 130×130、150×150、200×200 等； | |||||||||||||||||||||||||||||||||||
| . | |||||||||||||||||||||||||||||||||||
产品展示:
车间:
产品优势：
1、原材料优质，钢材强度高
2、操作简单
3、高耐磨性
4、钻井效率高
5、高硬度
6、筒体圆度好
7、使用寿命长
Advantages:
1.High quality raw materials and high steel strength
2.Simple operation
3.High wear resistance
4.High drilling efficiency
5.High hardness
6.Good roundness of the cylinder
7.Long service life
包装及交付：
